Discharge Flange : DN 100 - DN 250
Capacity : Up to 840 m³/h
Head : Up to 42 m
Working Temperature : -25 °C to +140 °C*
Casing Pressure (Pmax) : 10 bar
view downloadable content
Discharge Flange : 4" - 10"
Capacity : Up to 3700 GPM
Head : Up to 137 ft
Working Temperature : -13 °F to +284°F*
Casing Pressure (Pmax) : 10 bar
view downloadable content
Pump Design Features
  • TKF-KE series pumps are self-priming, flap centrifugal pumps.
  • Since they are self-priming, it is sufficient if the pump is above the well where the pump will be suction, and only the suction installation is in the well.
  • It is possible to operate with a diesel engine or electric motor through the elastic coupling.
  • TKF-KE series consists of 4 different types: 4”, 6”, 8”, 10”.
  • Impellers are open and have two blades and can pump solid particles up to 76 mm (3”) depending on the pump size.
  • It is very easy to clear the blockage. The front removable suction cover facilitates access to the impeller, stuffing box and mechanical seal. It is very easy to remove the blockage without any action in the suction and discharge installations.
  • Power Plants
  • Agricultural Irrigation & Drainage
  • Petroleum Industry
  • Water Treatment and Pressurization
  • Mining
  • Chemical Industry
  • Food and Beverage Industry
  • Iron and Steel Industry
Contact Us
Do you need help? Do you have a question or are you looking for your personal Sempa contact person? Then you are in the right place. For quick answers to frequently asked questions, you can go directly to our FAQ section, or you can contact us directly at any time.
Contact the authorized representative in your region write to us
Pump Selection
choose the pump that suits your needs or project visit the address.
Make a Choice
Related Other Products

Büyükkayacık Organize Sanayi Bölgesi Mahallesi 22. Sokak NO:4 42250 Selçuklu, Konya / Türkiye

+90 444 64 13 Stage Dijital Web Tasarım Ajansı