Discharge Flange : DN 32 - DN 125
Capacity : Up to 500 m³/h
Head : Up to 100 m
Working Temperature : Up to +350 °C
Casing Pressure (Pmax) : 10 bar (16 bar)*
view downloadable content
Discharge Flange : 1 1/4" - 5"
Capacity : Up to 2200 GPM
Head : Up to 330 ft
Working Temperature : Up to +662 °F
Casing Pressure (Pmax) : 10 bar (16 bar)*
view downloadable content
Pump Design Features
  • Horizontal shaft, volute, single stage, end suction, air cooled, closed impeller centrifugal pumps.
  • Suction and discharge flanges conform to EN 1092-2 / PN 16. (flanges for pumps with stainless steel body conform to EN 1092 - 1 / PN 16)
  • With the detachable design of the pump, it is possible to remove the bearing assembly, the seal bearing, the pump shaft and the impeller without removing the snail from the pipe. (Optionally, the rotor group of the pump can be removed without removing the motor from the motor carrier by applying the spacer sleeve coupling).
  • All impellers are balanced dynamically or statically in accordance with ISO 1940 class 6.3.
  • The direction of rotation is clockwise when viewed from the motor side.
  • The axial force is compensated by the balancing vanes on the rear of the impeller.
  • TKF-K type pumps use “oil lubrication” bearings as standard.
  • Power Plants
  • Chemical Industry
  • Heating, Ventilation and Air Conditioning
  • Iron and Steel Industry
Contact Us
Do you need help? Do you have a question or are you looking for your personal Sempa contact person? Then you are in the right place. For quick answers to frequently asked questions, you can go directly to our FAQ section, or you can contact us directly at any time.
Contact the authorized representative in your region write to us
Pump Selection
choose the pump that suits your needs or project visit the address.
Make a Choice
Related Other Products

Büyükkayacık Organize Sanayi Bölgesi Mahallesi 22. Sokak NO:4 42250 Selçuklu, Konya / Türkiye

+90 444 64 13 Stage Dijital Web Tasarım Ajansı