SP Serisi Hidrofor Pompaları - SP Series Booster Pumps , Pompa Teknolojileri, Çözümleri ve Sistemleri

+90 444 64 13

Geri

EN TR ES RU

SP Series Booster Pumps Features
EU
US

Discharge Flange	:	DN 32 - DN 50
Capacity	:	Up to 150 m³/h
Head	:	Up to 150 m
Working Temperature	:	0 °C to +60 °C *
Casing Pressure (Pmax)	:	10 bar (16 bar)*

view downloadable content

Discharge Flange	:	1 1/4" - 2"
Capacity	:	Up to 660 GPM
Head	:	Up to 490 ft
Working Temperature	:	+32 °F to +140 °F *
Casing Pressure (Pmax)	:	10 bar (16 bar)*

view downloadable content

Pump Design Features

SP Series boosters are designed for pumping non-corrosive liquids without large solid particles.
The impeller material is glass fiber-reinforced Noryl.
Vertical pumps with a closed impeller can be disassembled.
The discharge flange of the pump is on the motor side, and the suction flange is located below.
With its vertical shaft design, it occupies less space than a horizontal shaft design.
Boosters are available with either horizontal or vertical pumps.
It can be produced as single, double, or triple pumps, depending on the desired flow rate. Up to 6 pumps can be configured if needed.
The single-pump booster includes phase protection and a sequencing relay (FKS).
A water level float (electric float) is available in single-pump systems.
Phase control, liquid level control, and multiple pump sets are standard features in multi-pump boosters.
Pressure boosters can be frequency-controlled upon request and can be manufactured with variable speed.
Boosters can operate automatically or manually in two different modes.

Applications

Building Systems

Do you need help? Do you have a question or are you looking for your personal Sempa contact person? Then you are in the right place. For quick answers to frequently asked questions, you can go directly to our FAQ section, or you can contact us directly at any time.

Contact the authorized representative in your region write to us